DESCRIPTION Magnetic core drill with large depth of feed, therefore suitable for use of core drills, spiral drills and countersinks Magnetic base with high holding power permits working on vertical surfaces and overhead Robust Metabo marathon motor with internal wiring for long service life Integrated coolant container for easy to dose internal cooling of the core drill Bright LED light for easy alignment in poor light conditions Swarf protection can be fixed without tools and protects the user from metal shavings and tool contact Protective circuit starts motor only if the magnet is activated Restart protection: prevents unintentional start-up after power supply interruption Lockable slide for comfortable tool change Handle for easy carrying and lifting Resistant mains cable (5 m) with rubber shroud • SPECIFICATION • Rated input power 1000 W • Output power 520 W • Max. drill-? with core drill 32 mm / 1 1/4 ” • Max. drill-? with spiral drill 13 mm / 1/2 ” • Maximum drilling depth 50 mm / 2 ” • No-load speeds 700 rpm • Speeds at rated load 450 rpm • Bit retainer Weldon shaft 19 mm (3/4″) • Weight 11.9 kg / 26.2 lbs • Cable length 5 m / 16 ft • Torque 50 Nm // 443 in-lbs • Max. depth of feed 160 mm / 6 5/16 ” • Max. magnetic holding force 12250 N • Dimensions of the magnet base 90 x 189 mm // 3 9/16 x 7 1/2 ” • Height carriage lowest position 343 mm / 13 1/2 ” • Height carriage topmost position 490 mm / 19 9/32 ” • Vibration • Drilling in metal 2.5 m/s? • Uncertainty of measurement K 1.5 m/s? • Noise emission • Sound pressure level 85 dB(A) • Sound power level (LwA) 98 dB(A) • Uncertainty of measurement K 3 dB(A)